View 2SD116006_4125873.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SD1160
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
2SD1160
Switching Applications Suitable for Motor Drive Applications
* * * High DC current gain Low saturation voltage: VCE (sat) = 0.6 V (max) (IC = 2A, IB = 40 mA) Built-in free wheel diode Unit: mm
Absolute Maximum Ratings (Ta = 25C)
Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current DC Pulse Symbol VCBO VCEO VEBO IC ICP IFP PC Tj Tstg Rating 50 20 6 2 4 1 1 10 150 -55 to 150 Unit V V V A A W C C
Diode forward surge current (t = 1 s) Collector power dissipation Junction temperature Storage temperature range Ta = 25C Tc = 25C
JEDEC JEITA

TOSHIBA 2-7B1A Note: Using continuously under heavy loads (e.g. the application of high Weight: 0.36 g (typ.) temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Equivalent Circuit
COLLECTOR BASE 800 EMITTER
1
2006-11-21
2SD1160
Electrical Characteristics (Ta = 25C)
Characteristics Collector cut-off current Emitter cut-off current Collector-emitter sustaining voltage Symbol ICBO IEBO VCEO (SUS) hFE (1) DC current gain (Note) hFE (2) Collector emitter saturation voltage Base-emitter saturation voltage Emitter-collector forward voltage VCE (sat) VBE (sat) VECF Test Condition VCB = 50 V, IE = 0 VEB = 5 V, IC = 0 IC = 20 mA, L = 40 mH VCE = 2 V, IC = 1 A VCE = 2 V, IC = 2 A IC = 2 A, IB = 40 mA IC = 2 A, IB = 40 mA IE = 1 A, IB = 0 Min 2.5 20 100 60 Typ. 6.25 0.4 Max 1 15 300 0.6 1.5 2.0 V V V Unit A mA V
Note: hFE (1) classification O: 100 to 200, Y: 150 to 300
Classification 2SD1160-O 2SD1160-Y Min 100 150 Max 200 300
Marking
D1160
Part No. (or abbreviation code) Lot No.
Characteristics indicator
A line indicates lead (Pb)-free package or lead (Pb)-free finish.
2
2006-11-21
2SD1160
IC - VCE
1.0 8 10 0.8 6 0.6 5 4 0.4 3 IB = 2 mA 0 0 0 2 4 6 8 10 12 14 10 10 30 100 Common emitter Tc = 25C 1000
hFE - IC
Common emitter 500 VCE = 2 V Tc = 100C 25 100 -25 50 30
Collector current IC
0.2
DC current gain hFE
(A)
300
300
1000
3000
Collector current IC
(mA)
Collector-emitter voltage
VCE (V)
VCE (sat) - IC
Collector-emitter saturation voltage VCE (sat) (V)
1 Common emitter 10
VBE (sat) - IC
Common emitter
Base-emitter saturation voltage VBE (sat) (V)
0.5 0.3
IC/IB = 50 Tc = -25C 25 100
5 3
IC/IB = 50
0.1
1
Tc = -25C
0.05 0.03 30
0.5
25 100
100
300
1000
3000
Collector current IC
(mA)
0.2 30
100
300
1000
3000
Collector current IC
(mA)
IE - VECF
1000 500 IB = 0
rth - tw
Transient thermal resistance rth (C/W)
Curves apply only to limited areas of thermal resistance. (Single nonrepetitive pulse) Tc = 25C
IE (mA)
1000
300
Tc = 100C 25 -25
100
Emitter current
100 50 30
10
1
10 0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.1 1m
10 m
100 m
1
10
100
1000
Emitter-collector forward voltage
VECF
(V)
Pulse width
tw (s)
3
2006-11-21
2SD1160
Safe Operating Area
Operating conditions used for a 1 test circuit shown in Figure 1 must not exceed this shaded area. 0.5 Tc = 25C
10 V L = 10 mH 3 ms INPUT 2 ms T.U.T 330 VCC
Collector current IC
(A)
Figure 1
0.01 0 0 10 20 30 40 50 60 70
Safe Operating Area Test Circuit
Collector-emitter voltage
VCE (V)
PC - Ta
1.2
PC (W) Collector power dissipation
1.0
0.8
0.6
0.4
0.2
0 0
20
40
60
80
100
120
140
160
Ambient temperature Ta (C)
4
2006-11-21
2SD1160
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
5
2006-11-21

▲Up To Search▲

Price & Availability of 2SD116006

	To Download 2SD116006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .